Project

General

Profile

Testing register of Tigase by Tsung

Bruce Chung
Added over 2 years ago

I used tsung do the register testing on Tigase.

With this setup, during the first 10 minutes of the test, a new user will be created every 20 seconds

In this case, only 20 users will be created.

But From the logs/tigase.log.0, I just see the log of five user test_reg_r1_1 to test_reg_r1_5.

Is any mistake of the configuration?

The files of tigase.conf, init.properties, tsung script, the log of tigase server were Attached.

postgresql was used as user-db.

JVM options: -Xms2048M -Xmx10240M -XX:PermSize=512m -XX:MaxPermSize=1024m -XX:MaxDirectMemorySize=512m

Tsung script :


error



Replies (4)

Added by Eric Dziewa over 2 years ago

Can you try to add some thinktimes to jabber_register.xml especially after connect. Also look at tsung logfile.

Added by Bruce Chung over 2 years ago

Hi Eric,

The tsung logfile attached.

How to confirm what register requests were sent to Tigase server from log?

Added by Bruce Chung over 2 years ago

Hi Eric,

I add thinktimes to jabber_register.xml.

But why still just the 20 users were register successfully ?

Added by Bruce Chung over 2 years ago

Hi Eric,

I had found the mistake in my jabber_register.xml

These two option limit the users max 20.

    (1-4/4)